Smitty's Equipment Sales

630-678-9010

 

 

 

BACK TO HOME PAGE

 

WEBSITE PAGE LINKS BELOW

 

  

 

 

LIFT PARTS

In-Ground Lifts

 

Power Units

For Lifts &

Power Unit

Repair Parts

 

Vehicle Lift 

Height Adapters &

Replacement

Rubber Pads

 
 

Challenger Lifts

 

BendPak Lifts

 

 

Globe

In-Ground Lifts

Made in the USA

 

 In-Ground Motorcycle & Equipment Lift

Made in the USA

 

Rotary & Other 

Lift Accessories

 

Fore & Aft 

Truck & Bus

In-Ground Lifts & Repair Parts

 

Portable Truck & Bus Lift 72,000 Pound Capacity

 

Ranger Wheel Alignment System

 

NITROGEN

TIRE INFLATION MACHINES

 

Branick

Tire Cages, Tire Spreaders, Brake Bleeders & Strut Compressors

 

Saylor-Beall

Air Compressors

Made in the USA

 

CHAMPION

Air Compressor Repair Parts

 

 

Lincoln

Lube Equipment

 

Lincoln

Hose Reels

 

Samson

Lube Equipment

 

Samson 

Hose Reels

 

GRACO LUBE

EQUIPMENT

 

Tire Racks, 

Parts Washers,

Storage Lockers, 

Work Benches,

Oily Rag Cans

 

Oil Filter Crushers

& Tank Monitors

 

OIL STORAGE TANKS &

Tank Gauges

 

Exhaust Pipe Benders

BendPak

 

Waste Oil 

Drains

 

Brake Lathes,

Tire Machines, Wheel Balancers,

& Accessories

 

Work Lights,

Portable Under-Hood Work Light System & Fluorescent Lighting

 

 Air Conditioning Refrigerant &

Engine Coolant Servicing Equipment

 

FLOOR JACKS,

Engine Hoists,

Shop Presses,

Vehicle Dolly, Jack Stands &

Other Equipment

 

  

TERMS & CONDITIONS

 

Shipping To US Locations Only

 When purchasing from our website no credit card information is saved and no Customer information is shared with any third party other than our credit card processing company. 

 

 
 
 
 
 
 


 

 

Forward 6000MRL

 

   6000MRL Mid-Rise Lift Features:
The mid-rise 6,000 lbs. capacity lift is an excellent choice for low ceilings or adding a bay for seasonal increases in business. The 6000MRL provides good working height for tires, brakes and body repairs.

Additional Features:
Portable, easy to move
Two hydraulic cylinders
Multiple locking positions
Truck adapters included

 

Surface Mounted, Swing Arm Style, Portable Mid Rise Lift, 
115V Power Unit P.U. Stand included (also can be used as the lift Dolly) 
(4) Metal Screw and Saddle adaptors w/ mounted Rubber Pads. 
Max Lifting Height w/ Adaptor 49-1/2" 

 

$2214.00 Delivered

 

CALL 630-678-9010 TO ORDER

 

 

 

 

 

 


 

The Forward Model i10

 

  

 

   i10 Two-Post Lift Features:
Frame engaging rubber padded truck adapters with multiple extensions to raise most vehicles on the road today. Includes four (each) adapter extensions at 3.5″ and 5″. Spot-Rite™ 3-Stage Front Arms to accommodate vehicles both symmetrically and asymmetrically. This feature allows the technician to position the vehicle doors in front of or behind the column to prevent door damage.
Additional Features:
• 10,000 lbs. capacity for raising most passenger cars, trucks and vans.
• The I10 has been third party tested by ETL and approved by ALI.
• 3-stage front arm design enables you to position doors in front of the column or behind to avoid door damage.
• Adapter storage bracket kit
• Hydraulic cylinders in each column:
• Top-mounted | Direct pull lifting technology | Cylinder rod concealed inside the carriage

 

Three Stage Front Spot-Rite™ Arms 
Symmetric Columns, Direct Pull Hydro-Cylinders
Clear Floor Design; Includes Quick Change Height Adapters
12ft. Ceiling Clearance Required (ETL Approved)

 

Standard Lift Colors RED or BLUE

 

 

$3393.00 Delivered

 

CALL 630-678-9010 TO ORDER

 

 


 

Forward Model F10

 

 

Forward Model F10 Two-Post 10,000 Pound Capacity Lift 
Three Stage Front Arms, Symmetric Columns, Direct Pull Hydro-Cylinders, 

Clear Floor Design, Includes Quick Change Height Adapters 

NOTE: 12ft. Ceiling Height Required

(ETL Approved)

 

  F10 Two-Post Lift Features:
Frame engaging rubber padded truck adapters with multiple adapter extensions to raise most vehicles on the road today. Includes four of each of the following extensions: 3.5″ and 5″.

Additional Features:
10,000 lbs. capacity for raising most passenger cars, trucks and vans.
Third party tested by ETL and approved by ALI.
3-stage front and 2-stage rear arms
Adapter storage bracket kit
Hydraulic cylinders in each column:
Direct pull lifting technology, 

Top mounted, Full Stroke Cylinder Ram Concealed Inside Carriage

Standard Lift Colors RED or BLUE

 

 

 

$3086.00 Delivered

 

CALL 630-678-9010 TO ORDER

 

 

 


 

CALL 630-678-9010 

OR  

TO PURCHASE OR FOR A QUOTE


 

Forward I12 PRO

 

 

    I12 PRO Two-Post Lift Features:

Forward’s I12PRO two-post lift is gold certified with a 12,000 pound capacity for raising most passenger cars, trucks and vans. With two heavy-duty push hydraulic cylinders designed to increase lift performance and minimize down-time. Cylinders are located in each column concealed within the carriage itself. Durable powder coat finish provides exceptional protection from the wears a shop will see over the years. Forward’s spring operated arm restraints are just one feature that keep these heavy duty lift arms constantly performing at their peak performance.

Additional Features:

Hydraulic cylinders in each column
Full Stroke
Cylinder rod concealed inside carriage
75-3/4″ Rise | 80-3/4″ (With 5″ adapter extensions)
3 Stage arm design
Door Bumper Kits Standard
Overhead cable equalization
Single Point lock release
Large rubber-padded drop-in adapter with extra height extensions (1.75″, 3.5″ and 5″) 
Spring operated arm restraints, disengage at floor level
Padded overhead height limit switch bar
Durable powder coat finish

 

Standard Lift Colors RED or BLUE

 

 

i12N-303 Overall Height 143" (11' - 11") $5659.00 Delivered

 

i12N-302 Overall Height 154" (12' - 11") $5659.00 Delivered

 

i12N-300 Overall Height 166" (13' - 11") $5659.00 Delivered

 

i12N-301 Overall Height 178" (14' - 11") $5659.00 Delivered

 

 

$6214.00 Each Delivered 

CALL 630-678-9010 TO ORDER

 

 

 

 

 

 

 

 

 


 

Forward F12

 

 

   F12 Two-Post Lift Features:

Forward’s F12 two-post lift is gold certified with a 12,000 pound capacity for raising most passenger cars, trucks, and vans. With two heavy-duty push hydraulic cylinders designed to increase lift performance and minimize down-time. Cylinders are located in each column concealed within the carriage itself. Durable powder coat finish provides exceptional protection from the wears a shop will see over the years. Forward’s spring operated arm restraints are just one feature that keep these heavy duty lift arms constantly performing at their peak performance.

Additional Features:

Hydraulic cylinders in each column
Full Stroke
Cylinder rod concealed inside carriage
72-1/2″ Rise | 77-1/2″ Rise (With 5″ adapter extensions)
2-stage front and rear arms
Overhead cable equalization
Single Point lock release
Large rubber-padded swivel adapter with extra height extensions (3.5″ and 5″) 
Spring operated arm restraints, disengage at floor level
Durable powder coat finish

Standard Lift Colors RED or BLUE

 

 

F12N-303 Overall Height 143" (11' - 11") $4605.00 Delivered

 

F12N-302 Overall Height 154" (12' - 11") $4605.00 Delivered

 

F12N-300 Overall Height 166" (13' - 11") $4605.00 Delivered

 

F12N-301 Overall Height 178" (14' - 11") $4605.00 Delivered

 

 

$5057.00 Each Delivered 

CALL 630-678-9010 TO ORDER

 

 

 

 

 


DP10A Two-Post Lift

 

 

 

 

DP10A Two-Post Lift Features:

Incorporating a low-profile design, the DP10A 10,000 lbs. capacity two-post lift features low-profile/oversized pads with multiple extensions to raise most vehicles on the road today. Includes four (each) adapter extensions: 3.5″ and 5″. Integrating Spot-Rite™ 3-Stage Front Arm Design, the DP10A features offset arms to accommodate vehicles both symmetrically and asymmetrically. This feature allows the technician to position the vehicle doors in front of or behind the column to prevent door damage.

Additional Features:

Direct-Pull Lifting – high efficiency, low maintenance technology
Closed loop hydraulic system – preventing hydraulic contamination
Powder coat, oven baked finish – more durable than conventional coatings
Third party tested by ETL and certified by ALI
Padded shut-off bar
Spring operated arm restraints, disengage at floor level
Low profile arms
Single point release lock in each column, resets on upstroke
Optional high rise and extended height available
Door Bumpers standard

Standard Lift Colors RED or BLUE

 

 

 

$3634.00 Each Delivered 

CALL 630-678-9010 TO ORDER

 

 

 

 


BP9 Two-Post Lift 

 

BP9 Two-Post Lift Features:
The BP9 9,000 lbs. capacity lift is perfect for customers who need a two-post lift and have low ceilings. The BP9’s overall height is 111 1/4 inches tall. That means it will fit, even if you have 10 foot ceilings. The BP stands for base plate indicated by the steel plate that run between the two columns of the lift. This plate protects the cables that would normally run overhead on any other two-post lift. This allows for shorter columns, hence the lower ceiling height requirement.

This is a commercial grade car lift and should not be confused with any other cheap two-post vehicle lift. This is a Forward Lift® so it has been engineered to perform and built to last!

Additional Features:

Dual hydraulic cylinders
Low-Profile Threaded Adapters
Carriage latch system – engages every 3″
Secondary lock system includes a spring actuated slack chain locking device
Adapter extensions included
Powder coat, oven baked finish

Standard Lift Colors RED or BLUE

 

 

$3597.00 Each Delivered 

CALL 630-678-9010 TO ORDER

 

 

 


EFP8 FORWARD LIFT
Four post enthusiast/storage lift for home enthusiasts. 

A jack tray along with caster kit and 3 drip pans are included.
110v Power Unit. Lift Available in the color BLACK only.
(ETL Approved) Sale Price $3235.00 Delivered Nationwide

 

(EFP9 9,000 Pound capacity $3958.00 Delivered)



 

CR14 Four-Post Lifts 

 

 

CR14 Four-Post Lift Features:

 

General Service 4-Post, 182.5” Wheel Base Max., with 20” wide Runways,
and Jack In-rail Kit - anti-sway kit "built in" system Ramps (ETL Approved)

Designed to meet the service needs of today’s cars, vans, and trucks with 14,000 lbs. capacity!
Taller column design adds an 79″ rise height providing techs better vehicle service access. This coupled with the multi-position lock components keeps your shop flexible. A new improved heavy duty high-performance cable and sheaves system conveniently concealed under the runway – this heavy duty system allows for greater capacity and durability. Tucked under the lift this system remains accessible for quick inspections yet doesn’t pose a snag issue while working. Durable powder coat finish ensures your lift will continue to look good for years of service. Self-chocking approach ramps engage when lift is raised – protective strips on ramps prevent floor gouging. All Forward products are proof load tested to 1½ times rated capacity! The combination of high quality products and service provides you with the very best value – while not compromising safety, functionality or durability.

Additional Features:
Heavy duty hydraulic cylinder
Single Point latch release system
One piece formed runway design incorporates rolling jack channels
Multiple position latch points in each structural leg
Optional Accessories:

7,000 lbs. capacity rolling bridge jacks
Drive Through ramps optional
Internal airline kit
Turning radius gauges
Power unit cover
3-phase motor

Standard Lift Colors RED or BLUE

 

 

 

$5089.00 Each Delivered 

 

CALL 630-678-9010 TO ORDER

 

 


 

CR14EL - Extra Length Runways

 

General Service 4-Post, 215” Wheel Base Max., with 20” wide Runways. Filter/Regulator/Lubricator, pre drilled for (Optional) Internal Airline kit FC5760-14

 

$5859.00 Each Delivered 

 

 

 

 


CRA14 ALIGNMENT RACKS

 

 

CRA14S - Alignment Rack, 4-Post, 158” Wheel Base Max., with 20” wide Runways, w/ standard Drive On Ramps, includes Two (2) RRJ70G rolling jacks, Bolt on alignment kit with radius gauges, and internal airline kit. (ETL Approved) Not Available


 

CRA14 Alignment Rack, 4-Post, 182.5” Wheel Base Max., with 20” wide Runways, 
w/standard Drive On Ramps, includes 2 RRJ70G jacks, Bolt on alignment
kit with radius gauges, and internal airline kit. (ETL Approved) $12,440.00 Delivered

 


 

CRA14EL Alignment Rack, 4-Post, 215” Wheel Base Max., with 20” wide Runways, 
w/standard Drive On Ramps, includes 2 RRJ70G jacks, Bolt on alignment
kit with radius gauges, and internal airline kit. (ETL Approved) $13,571.00 Delivered

 

Standard Lift Colors RED or BLUE

 

CALL 630-678-9010 TO ORDER

 

 

 

 


 

 

CALL 630-678-9010 

OR  

TO PURCHASE OR FOR A QUOTE

 

 

All Logos, Names and Trademarks and illustrations throughout this site are the  property of their respective owners.  All the rest Copy write © 2000 by Smitty's Equipment Service, Division of Blizzard Wizzard's Snowplowing Incorporated