View Shopping Cart

Back To Home Page

 

Challenger Lifts

 

BendPak Lifts

 

Quality Lifts

 

Globe

In-Ground Lifts

 

Fore & Aft 

Truck & Bus

In-Ground Lifts

 

Rotary Lift Accessories

 

Portable Heavy Duty Truck Lift

 

Ranger Wheel Alignment System

 

Branick

Tire Cages, Tire Spreaders, Brake Bleeders & Strut Compressors

 

Vehicle Lift 

Height Adapters &

Replacement

Rubber Pads

 

Power Units

For Lifts &

Power Unit

Repair Parts

 

CHAMPION

Air Compressor

Repair Parts

 

Saylor-Beall

American Made

Air Compressors

 

Lincoln

Lube Equipment

 

Lincoln

Hose Reels

 

Samson

Lube Equipment

 

Samson 

Hose Reels

 

GRACO LUBE

EQUIPMENT

 

Tire Racks, 

Parts Washers,

Storage Lockers, 

Work Benches,

Oily Rag Cans

 

Oil Filter Crushers

& Tank Monitors

 

OIL TANKS &

Tank Gauges

 

Exhaust Pipe Benders

BendPak

 

Waste Oil 

Drains

 

Brake Lathes,

Tire Machines, Wheel Balancers,

& Accessories

 

Work Lights,

Portable Under-Hood Work Light System & Fluorescent Lighting

 

 Air Conditioning Refrigerant &

Engine Coolant Servicing Equipment

 

FLOOR JACKS,

Engine Hoists,

Shop Presses,

Vehicle Dolly, Jack Stands &

Other Equipment

 
 
 

TERMS &

CONDITIONS

 
 

 

Shipping To US Locations Only

Customer is responsible for unloading freight items from the delivery truck. Special delivery requests must be addressed prior to delivery and extra costs may be incurred for special delivery options.

 
 
 
 
 
 
 

 

You Can Order Any Item By Phone Too, Just Call 630-678-9010 

2% Discount when purchasing by check instead of credit card INFO LINK

 

 


FINANCING AVAILABLE

FINANCING AVAILABLE CLICK HERE

 

 

 


 

 

"Delivered" on BendPak/Ranger items means FREE SHIPPING to direct points within 48-contiguous states .

Transportation and shipping to remote and rural locations are non-direct shipping points with higher associated delivery costs not included in the Free Delivery Policy.

Rural Area Transportation Zone DIRECT SHIPPING POINT LINK CHECK YOUR ZIP CODE LINK

NOTE TO BUYER: "RATZ" Fees that are charged by BendPak/Ranger are not covered in the "Free Delivery" links on this website. Transportation and shipping to these remote and rural locations are non-direct shipping points with higher associated delivery costs. You can click the link provided above and enter your ZIP code to check if your shipping address is included on the added fee list. If it is on the list, the RATZ fee charged by BendPak is 5.0% but we will discount that fee to 3.5 % of the cost. 

NOTE! BendPak orders drop-shipped to Illinois or California from BendPak are subject to State sales tax.

Customer is responsible for unloading freight items from the delivery truck.


Manual Pipe Bender

BendPak BB-1

SALE! $6765.00 Delivered! 

 

202 Economy Package  #302 Package Included

 

Video about Preparing Bender and Operation LINK

 

USER MANUAL LINK 

 

Model: Manual Bender 5115150
Blue-Bullet exhaust pipe bender. Includes the 302 tooling package and a dual function end finishing unit for precision OE expansions and flares.
  • Two separate end finishing units at rear for all necessary flaring and expanding
  • Knee control and depth-of-bend degree plate for manual bending operations
  • Includes 302 tooling package (See Features/Specs below)

Description
Now you do have a choice. A bender that delivers superior performance at a highly competitive price. BendPak took the standard bender and equipped it with a simple knee valve and degree plate combination. Made it simple but rugged, and affordable.  The knee operated valve gives you precise control and hands free bending capability with the convenience of trouble-free operation. Simply push the lever to the left to advance the bending die then to the right to retract it. Heavy duty cast iron construction means the valve will stand up to years of heavy use.

Quick-Change Bending Dies - Who has time to waste? Especially when you have a car in the air and others lined up. BendPak first came up with the idea of twist-lock tooling and quick-change bending dies others said it wouldn’t work. Well it did, and it still does. In fact it still does so well that others copied. Imitation really is the best form of flattery.

180-Degree Bending Capacity - You say you have to bend deep. Well, how does a U-shape sound? Be sure to ask for the 180-Degree dies if you’re planning to bend more than 170 degrees. You’ll get perfect deep bends on a 5” radius without the pipe sticking or hanging up. That’s because we use an exclusive relief cut design on our bending dies that helps maintain the pipes uniformity throughout the bend cycle and eliminates excessive “crimping” or deformation.

3” Bending Capacity

Long Stroke Bending Cylinder  

Clampless Swager - All BendPak benders are equipped with exclusive Clampless Swager which puts out an incredible force of over 30,000 pounds for quick and precise end forming. The Clampless Swager provides rapid set-up time and a high degree of accuracy for both I.D. and O.D. expansions, slip-fits, flares, ball-joints, reductions, and manifold flanges. All tooling is quick release. 

Internal Segment Expander - Internal segment expander is just as unique as the Clampless Swager and can be used for both I.D. and O.D. expansions, slip-fits, flares, ball-joints, and manifold flanges. The buttress canister has a single position setting for all I.D. expansions but can also be adjusted for special sizing requirements. A single arbor is used for all tubing sizes 1-1/2” - 3”.

Features

  • Two separate end finishing units at rear for all necessary flaring and expanding

  • Knee control and depth-of-bend degree plate for manual bending operations

  • Includes 302 package (See below)

  • Comes complete with quick release bending and end finishing dies

  • Includes high-speed clampless swager and internal expander

  • Updated bend data system available for automobiles and light trucks dating back to 1960

  • Clampless swager - easy to use drop-in collars makes swaging operations quick and efficient

  • Twist-lock tooling - quick change tooling saves time

  • Integrated power relief control valve - control valve features oversize handles and built in pressure relief system

  • Pass-through cylinder stem - the top cylinder stem passes completely through the main frame

  • Rigid frame - a rigid 6” x 6” x 3/8” welded steel tube is used for the main frame

  • Commercial grade hydraulic cylinders - industrial cylinders provides better performance and reliability

  • Chrome-molly shafts - all cylinders features hardened chrome-molly shafts that conform to
    ANSI 92.2 standards

  • Quick release bending dies - quick change tooling means faster set up times

  • Precision ground bending head - all bending head surfaces are surface ground within .002 of an inch

  • Clutter free bending area - controls are enclosed to keep the front obstruction free

  • Oversize barrel shafts - large 2-1/2” diameter machined steel barrel shafts used in conjunction with oil impregnated bronze bushings provide ultimate dependability and minimum maintenance

  • Grease fittings - standard grease fittings allow for simple lubrication

  • Controls - NEMA rated on/off switch box incorporates overload relays that automatically disrupt power supply should an over-current situation occur.

  • Pressure gauges - know exactly what the system pressures are at all times

  • Industrial grade casters - large cast iron casters help you easily move the bender around your shop

  • Adjustable pressure valve - adjust back gate pressure easily with this adjustment screw located
    right up front

  • One piece barrel - a one piece solid steel barrel is your assurance that the bending gates stay perfectly aligned with the bending ram

  • Heat-treated tooling - all machined steel tooling is heat treated for greater service life

  • Convenient tool trays - keeps your tooling organized

  • Strong motor - a large 5 HP Baldor energy efficient motor is used for maximum performance

  • Direct-drive pump - a direct-drive high speed 4 GPM pump is used for
    maximum power and performance

  • Single enclosed bottom cylinder - this single bottom cylinder applies pressure evenly to the back gates and because it is hidden, does not interfere with the tubing

  • Large capacity reservoir - a large fluid reservoir keeps the hydraulic oil running cooler and contamination to a minimum

  • Filtered hydraulic system - a canister type oil filter keeps the oil contamination free

  • Oil sight gauges - allows you to visually inspect oil levels

  • Over size hose - we purposely use 1/2” high pressure hose for better speed and cooling characteristics

  • Open sided swager box - means easier access and less chance of “crashing” tools and
    damaging the cylinder

302 Package Included

BENDING DIES PIPE COLLARS
QTY.
PART NO. TOOLING DESCRIPTION
QTY.
PART NO. TOOLING DESCRIPTION
1
5R-212 5" Radius Die / 2-1/2"
1
HAC-212 2-1/2" Pipe Collar
1
5R-214 5" Radius Die / 2-1/4"
1
HAC-214 2-1/4" Pipe Collar
1
5R-200 5" Radius Die / 2"
1
HAC-200 2" Pipe Collar
1
4R-214 4" Radius Die / 2-1/4"
1
HAC-134 1-3/4" Pipe Collar
1
4R-200 4" Radius Die / 2"
1
HAC-112 1-1/2" Pipe Collar
1
35R-134 3-1/2" Radius Die / 1-3/4" END FINISHING TOOLS
1
35R-112 3-1/2" Radius Die / 1-1/2"
QTY.
PART NO. TOOLING DESCRIPTION
BACK SHOES
1
HPF-300 45 / 90-Degree Flare
QTY.
PART NO. TOOLING DESCRIPTION
1
DD-134/212 Doming Die
2
BS-212 2-1/2" Back Shoes
2
BFED-134/212 Female Ball Flares
2
BS-214 2-1/4" Back Shoes
1
CFT-200 2" Manifold Flange Tool
2
BS-200 2" Back Shoes
1
B-212 2-1/2" Male Ball Flange
2
BS-134 1-3/4" Back Shoes
1
FP-100 Flattening Plate
2
BS-112 1-1/2" Back Shoes
1
ST-1 Slip-Twist Adapter
HALF SHOES SEGMENT EXPANDERS
QTY.
PART NO. TOOLING DESCRIPTION
QTY.
PART NO. TOOLING DESCRIPTION
1
HS-212 2-1/2" Half Shoe
1
HSA-112 Arbor
1
HS-214 2-1/4" Half Shoe
1
SS-212 2-1/2" Segment Exp.
1
HS-200 2" Half Shoe
1
SS-214 2-1/4" Segment Exp.
1
HS-134 1-3/4" Half Shoe
1
SS-200 2" Segment Exp.
1
HS-112 1-1/2" Half Shoe
1
SS-134 1-3/4"- 1-7/8"Segment Exp.
SOLID EXPANDER DIES
1
SS-112 1-1/2" Segment Exp.
QTY.
PART NO. TOOLING DESCRIPTION ACCESSORIES
1
STED-212 2-1/2" Exp. Die / 2-1/4" Male Ball
QTY.
PART NO. TOOLING DESCRIPTION
1
STED-214 2-1/4" Exp. Die / 2" Male Ball
1
TTA-1000 Tool Tray Set
1
STED-200 2" Exp. Die / 1-3/4" Male Ball
2
DPS-150 Pusher Block Springs
1
STED-134 1-3/4" Expander Die
1
Manual Instruction Manual
1
STED-112 1-1/2" Expander Die
1
Video Instruction Video
 
1
OR-1 Bag / Assorted O-Rings

Specifications
Maximum bending radius: 5" / 127 mm.
Minimum bending radius: 3-1/2" / 89 mm.
Maximum tube capacity: 3" / 76 mm. / .095 wall
Dies supplied ( 302 Die package ): 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2" **
Top cylinder working force: 60,000 lbs.
Hydraulic filter: 60,000 lbs.
Standard motor: 5-HP / 208-230 VAC / 60 HZ. / 1ph.


Shipping Information

  • Dimensions - 48" x 70" x 30" / 1219 mm. X 1778 mm. / 762 mm.
  • Shipping Weight - 1264 lbs. / 573 kg.

 

 

 

All Logos, Names and Trademarks and illustrations throughout this site are the  property of their respective owners.  All the rest Copy write 2000 by Smitty's Equipment Service, Division of Blizzard Wizzard's Snowplowing Incorporated