View Shopping Cart

PAGE LINKS BELOW

 

 

Challenger Lifts

 

BendPak Lifts

 

Quality Lifts

 

Globe

In-Ground Lifts

 

Fore & Aft 

Truck & Bus

In-Ground Lifts

 

Rotary Lift Accessories

 

Portable Heavy Duty Truck Lift

 

Ranger Wheel Alignment System

 

Branick

Tire Cages, Tire Spreaders, Brake Bleeders & Strut Compressors

 

Vehicle Lift 

Height Adapters &

Replacement

Rubber Pads

 

Power Units

For Lifts &

Power Unit

Repair Parts

 

CHAMPION

Air Compressor

Repair Parts

 

Saylor-Beall

American Made

Air Compressors

 

Lincoln

Lube Equipment

 

Lincoln

Hose Reels

 

Samson

Lube Equipment

 

Samson 

Hose Reels

 

GRACO LUBE

EQUIPMENT

 

Tire Racks, 

Parts Washers,

Storage Lockers, 

Work Benches,

Oily Rag Cans

 

Oil Filter Crushers

& Tank Monitors

 

OIL TANKS &

Tank Gauges

 

Exhaust Pipe Benders

BendPak

 

Waste Oil 

Drains

 

Brake Lathes,

Tire Machines, Wheel Balancers,

& Accessories

 

Work Lights,

Portable Under-Hood Work Light System & Fluorescent Lighting

 

 Air Conditioning Refrigerant &

Engine Coolant Servicing Equipment

 

FLOOR JACKS,

Engine Hoists,

Shop Presses,

Vehicle Dolly, Jack Stands &

Other Equipment

 
 

TERMS &

CONDITIONS

 

 

Shipping To US Locations Only

Official PayPal Seal

 

 

 

Equipment Financing LINK

 

You Can Order Any Item By Phone Too, Just Call 630-678-9010 

2% Discount when purchasing by check instead of credit card INFO LINK

 

Ranger® 3DP4100 Alignment System

Sale price $14,435.00 Delivered 

Includes free On-Site Training from Ranger

NOTE: If you pay by check instead of using a credit card or paying electronically, 

you can deduct 2.0% credit card processing fee on any purchase on this web page. 

Call for Info 630-678-9010

 

"Delivered" on BendPak/Ranger items means FREE SHIPPING to direct points within 48-contiguous states .

Transportation and shipping to remote and rural locations are non-direct shipping points with higher associated delivery costs not included in the Free Delivery Policy.

 

Rural Area Transportation Zone DIRECT SHIPPING POINT LINK CHECK YOUR ZIP CODE LINK

NOTE TO BUYER: "RATZ" Fees that are charged by BendPak/Ranger are not covered in the "Free Delivery" links on this website. Transportation and shipping to these remote and rural locations are non-direct shipping points with higher associated delivery costs. You can click the link provided above and enter your ZIP code to check if your shipping address is included on the added fee list. If it is on the list, the RATZ fee charged by BendPak is 5.0% but we will discount that fee to 3.5 % of the cost. 

NOTE! BendPak orders drop-shipped to Illinois or California from BendPak are subject to State sales tax.

Customer is responsible for unloading freight items from the delivery truck.



The Target 3DPro™ is the fastest, most accurate wheel alignment system in the industry thanks to advanced imaging technology that delivers fast and accurate alignments. A proprietary graphic display is used with high-definition cameras to provide visual and directional assistance during all alignment measuring procedures.

The Target 3DPro increases productivity by allowing technicians to do more alignments in less time compared to conventional systems. The Target 3DPro is perfect for wheel service repair shops handling a high volume of wheel alignments who are looking for dramatic improvements in profitability. With minimal investment and reduced training, the Ranger Target 3DPro aligner expands your service potential and sends more profit to your bottom line. ProSpec® feedback that assists the technician in diagnosing problems all add up to customer satisfaction and improved shop efficiency.

All alignment steps from start-to-finish are clearly shown with vibrant animation and graphics providing a faster, more profitable and far easier to understand alignment procedure. Simplistic read results enable you to also identify potential problem areas specifically related to suspension components. The 3DP4100 wheel aligner gives you the option of selecting the most effective measuring routines before starting wheel alignment procedures. Standard option for a program-guided routine with initial and final measurements; rapid procedure for measurements without caster steering angle and/or run-out compensation; or free measurement for checking individual values as required.

The Target 3DPro aligner combined with ProSpec® results-driven software guarantees:

• Increase in bottom line revenue
• 30 percent average increase in read-rate accuracy
• Fewer costly re-reads and investigations
• Decline in come-backs and customer complaints ProSpec® Alignment Software
• Specially designed for ease of use, speed and helpful technician feedback

Choose from 3 individual alignment procedures:

• Standard start-to-finish computer guided program
• Quick readings without caster steering angle and/or run-out compensation

Free range measuring for checking individual readings as required Screen displays include:

• Front and rear camber (-15º to +15º) • Front and rear toe (also "super toe" - toe out on turns)
• Front caster (-28º to +28º)
• Individual caster, camber and toe
• Front and rear setback, SAI and thrust angle, included angle
• Elevated 3 Point or rolling run-out compensation
• Elevated adjustments
• Individual zoom readings allows operators to clearly see screen and software function from any wheel position
• Customer database with customer notes and comments
• Before and after adjustment readings
• Visual vehicle adjustment help
• ProSpec® software is available in multiple languages. Check for current language availability.
• Optional yearly specification and software updates are PC network available or by simply installing a new program cartridge.

Description
    The Ranger® CRT380R Alignment System is a highly accurate, four-wheel, wireless alignment system for domestic and foreign cars and trucks. It features 8-CCD technology, Bluetooth® data transfer and our refined ProSpec® Alignment software that was designed for simplicity and speed.

    All alignment steps from start-to-finish are clearly shown with vibrant animation and graphics providing a faster, more profitable and far easier to understand alignment procedure. This unique combination of user-friendly functionality and ease-of-use enables any business owner interested in providing alignment service as an additional profit source to do so with a minimal investment and training. ProSpec® software includes the essential software tools to perform fast, accurate alignments with factory results. It’s easy to use, consistent and precisely-measurable, and requires minimal supervision. Technicians proceed easily and receive immediate feedback and correction. Simplistic read results enable you to also identify potential problem areas specifically related to suspension components.

    ProSpec® software was designed to give your wheel alignment service the best possible efficiency. It gives you the option of selecting the most effective measuring routines before starting wheel alignment procedures. Standard option for a program-guided routine with initial and final measurements - rapid procedure for measurements without caster steering angle and/or runout compensation - or free measurement for checking individual values as required.

    The Ranger CRT380R aligner combined with ProSpec® results-drivensoftware guarantees:

      • Increase in bottom line revenue
      • 30 percent average increase in read-rate accuracy
      • Fewer costly re-reads and investigations
      • Decline in come-backs and customer complaints

 Check out the following features that make the Ranger CRT380R Wheel Aligner your best choice:

 8-CCD Wheel Sensors

  • Deliver greater speed and improved range for accurate results
  • Cordless Bluetooth® sensors remove hassle of connecting cables
  • On-sensor controls permits users to operate selective computer software functions from any wheel location eliminating the need for countless return trips to the console
  • Greater speed, improved range and accuracy and quick, precise measurement readings
  • Instantaneous wireless data transfer as far away as 200-feet between sensors and CRT380R aligner
  • Tough polymer casings and sturdy construction reduces potential damage to sensitive sensor components
  • Contamination-proof touch-pad controls
  • Improved ball-bearing actuators for precise pendulum movement
  • Automatic battery-charging docking stations built right on the cabinet sides keeps sensors charged and ready at all times
  • Sleep-mode function during vehicle adjustment periods to preserve battery life
  • On-screen displays alert alignment technician of possible sensor adjustments required for precise, accurate readings
  • Long-life 7.2 volt NiMH* batteries provide a full day of continuous operation

  • *Nickel Metal Hydride (NiMH) is the next generation of rechargeable batteries that emerged after NiCd (Nickel-Cadmium Battery). They use hydrogen absorbing alloys in their negative electrode (anode) and nickel oxide in their positive electrode (cathode). NiMH batteries are more environmentally friendly than NiCd, and offer much greater battery capacity per volume than NiCd. Another major advantage of NiMH over NiCd is their ability to accept a charge at any time without suffering from "memory effect”.
What is 8-CCD?
    Power is supplied to the measurement sensors by built-in rechargeable batteries. The alignment values are determined with optical measurement using CCD line cameras (Charge-Coupled Devices) and 4 infrared light sources in each measurement sensor. There is a camera in the main housing, a second on the boom. Each CCD camera is illuminated alternately by 2 IR light sources; this requires a skewed position of the CCD lines in the cameras by 45" with respect to both light beams. One light source inside the camera beams directly from above onto the CCD line. This light source is built into a pendulum and handles the measurement of camber and steering axis inclination. The second light beam falls from the opposite measurement sensor in the horizontal direction onto the same CCD line and handles the measurement of the toe angle. The CCD camera line is divided into 1024 adjacent segments. From the beam intensity on the different segments, it is possible to calculate the beam deflection and thus the corresponding angle. Here an upstream lens that reduces the point-shaped light beam to a line and the ability of the downstream camera electronics to detect the lightest area of the light line achieve high precision. The individual control procedures and data streams are transmitted between the measurement sensor and the receiver in the equipment cabinet via infrared.

    The 8-CCD wireless measuring sensor system consists of 8-CCD cameras which are fitted within the horizontal sensors (toe) and vertical sensors (camber and angle of steering inclination). As shown below, the 8 sensors form an enclosed 360° measurement field.

What is Bluetooth?

    Bluetooth® is a completely different way to form connections between the wheel sensors and the aligner computer. You can think of it as a cable- replacement technology that uses the 2.4 GHz (ISM) band. With Bluetooth you don't need to do anything special to initiate communications – the devices find each other automatically and start conversing without user input.

    Signals are omni-directional and can even pass through walls. The devices don't need to be perfectly aligned and don't need an unobstructed line of sight. Bluetooth devices use a combination of the Personal Identification Number (PIN) and a Bluetooth address to identify other Bluetooth devices. The transmission scheme (FHSS) provides another level of security in itself. Instead of transmitting over one frequency within the 2.4 GHz band, Bluetooth radio transmission uses fast frequency-hopping spread spectrum (FHSS) technology, allowing only synchronized receivers to access the transmitted data so that interference from other RF sources is highly unlikely. Both Bluetooth and WLAN can co-exist within the same environment.

 

User-Friendly Time Saving Features
  • Self-balancing, variable height camera lift system is built with precision bearing slides for easy adjustment
  • Commercial-grade cameras are designed with full frame optical lenses that ensure accuracy and stability
  • High-resolution drive-on approach camera provides full on-screen frontal view of vehicle driving on lift platforms.
  • Equipped with an additional large lower flat panel LCD monitor that provides operator with easy-to-read screen views all the way from the rear underside of the vehicle. No need for separate portable hand-held monitors.
  • Interactive software provides demonstration screens that assist the technician to easily proceed systematically through the adjustment process
  • Rugged checkerboard shockproof wheel targets are drop-tested for worry-free handling and are built with anti corrosion components capable of withstanding harsh working environments.
  • German engineered ProSpec® software has been designed to be compatible with Windows 7 and capable of future upgrades.
  • In less than 2-minutes, technicians can complete total vehicle set-up (including run-out compensation) and obtain full geometry alignment readings.
  • Exclusive One-Touch enhanced software interface results in increased productivity.
  • A web based application that can be accessed from iPhone, iPod touch and iPad users to enjoy full wireless remote operation.
  • A reduction in the number of vulnerable electric components results in reduced downtime, lower operating costs and a longer service life cycle of the equipment.
  • Superior screen graphics with vibrant animation and displays deliver easy to understand visuals and instruction.
  • Alignment functions and measurements are controlled via the mouse, keyboard or remote control.
  • Self-explanatory graphic user surface provides simple understanding.
  • Compatible with low ride-height vehicles or those with ground-effects.
  • Self-centering wheel-clamp adaptors cover an extended range of vehicles.
  • Cordless design remove hassle of connecting cables.
  • Technician has the option to customize alignment units of measure, accuracy, language, etc.
  • Technician has a choice of rolling or lifted run-out modes.
  • Features self-diagnostic help screen and system information.
  • Continuous checking ensures accurate toe measurements.
  • On-screen display indicates if sensor leveling is required.
  • Vehicle adjustment illustrations and multiple adjustment bar graphs.
  • Adjustment illustrations provide illustrated diagrams and instructional information of recommended OEM adjustment methods..
  • Valuable customer information can be conveniently stored in the database allowing shop personnel to quickly reference previous alignment work orders.
  • Before and after measurements can be printed in full-color to explain service and record work performed.


Standard Equipment
  • (1) Target 3DPro variable height camera tower
  • (1) Dell® OptiPlex® PC (♠♣) with powerful Intel® Core2 Duo 1.60 GHz processor provides high-powered processing with low-power consumption.
  • Genuine Windows® 7 Operating System
  • Intel® Graphics Media Accelerator
  • 8 USB Ports (2 front, 4 back, 2 internal)
  • Full-sized, sloped keyboard for easy use. Provides user-friendly control of all alignment procedures.
  • (1) Computer mouse
  • (1) Console keyboard
  • (1) Remote control
  • (1) ___” diagonal Upper Flat Panel LCD Monitor (♠♣) designed for complete comfort and convenience with 1280x1024 pixels resolution for sharp and brilliant images of text and graphics. Offers wide viewing angle of 160° horizontal and vertical.
  • (1) ___” diagonal Lower Flat Panel LCD Monitor (♠♣) designed for complete comfort and convenience with 1280x1024 pixels resolution for sharp and brilliant images of text and graphics. Offers wide viewing angle of 160° horizontal and vertical.
  • (1) Rugged tower cabinet with integrated storage.
  • (4) 13”-25” wheel clamps
  • (1) Target 3DPro variable height camera tower
  • (1) Steering wheel lock
  • (1) Brake pedal depressor
  • Current year domestic and foreign car vehicle specifications

    (♠) Comparable unit will be supplied if unavailable at time of purchase
    (♣) All supported by round-the clock Dell Technical Support

    Optional
  • Calibration fixture

  • Equipment Specifications
    Power Requirements: 115V / 1Ph, 50/60 Hz / 8 amp - 230V / 1Ph, 50/60 Hz / 8 amp

 


 

 

Sample Training Agenda

Topics include:
  • Basic alignment theory
  • Basic alignment procedures for two wheel, thrust angle
    & four wheel
  • Pre alignment inspection procedures
  • Troubleshooting alignment problems
  • Diagnosing tire wear
  • Toe
  • Camber
  • Caster
  • Turning angle (toe out on turns)
  • Steering axis inclination (SAI)
  • Included angle
  • Thrust angle & rear axle steer
  • Setback
  • Ride height
  • Ball joints
  • Tie rod ends
  • Steering linkage
  • Idler & pitman arms

 

 

 

 


Learning Objectives

By the end of the training session you will be proficient in:
  • Camber, caster, toe and thrust angles, as well as the related effects these angles have on vehicle handling and tire wear.
  • The proper pre alignment inspection of suspension and steering systems.
  • Setting up the aligner and accurately measuring adjustable angles.
  • Performing two wheel and four‐wheel alignments using the most common OEM adjustment methods found on light cars and trucks, both domestic and imported.

 

 

 

 


FINANCING AVAILABLE

FINANCING AVAILABLE CLICK HERE


 

 

 

 

Smitty's Equipment Sales & Service

1433 W. Fullerton Avenue, Unit G

Addison, IL. 60101

1-630-678-9010

 

 


NOTE: If you pay by check instead of using a credit card 

or paying from our website, you can deduct 2.0% credit card

processing fee on any purchase on this web page.

  

Call for Info 630-678-9010 and Mail your check to the address below.

 

Make checks payable to:

Smitty's Equipment Service

 

Mail to: 

Smitty's Equipment Sales

1433 W. Fullerton Avenue, Unit G

Addison, IL. 60101

1-630-678-9010


 

 

All Logos, Names and Trademarks and illustrations throughout this site are the  property of their respective owners.  All the rest Copy write © 2000 by Smitty's Equipment Service, Division of Blizzard Wizzard's Snowplowing Incorporated